A Direct CTP Laser engraving system for engraving of concinuous elastomer or polymer sleeves, and flexographic printing plates.
This high power CO2 Laser system, is ideal for trade-shops or medium to large flexo printing companies, searching for the perfect ITR (In the round) solution.
This high power CO2 Laser system, is ideal for trade-shops or medium to large flexo printing companies, searching for the perfect ITR (In the round) solution.
- Continuous Flexo sleeves
- Elastomer plates
- Polymer plates
- Dry Offset plates
- Letterpress plates
Whatever printing medium you require, the robust FlexoStar can be fitted with air-mandrels, plate cylinder,
vacuum cylinder, magnetic cylinders and our unique "Kwik-Change" mandrelless sleeve engraving system.
- Available in sizes starting from 1600mm (62").
- Standard model has 1.800 mm maximum engraving width. Larger engraving widths available in 500 mm wider increments.
- Maximum engraving height (repeat length): Standard model is prepared for circumferences which produce up to 1250 mm repeat length
- Pendant touch screen operator panel
- Machine and engraving function control software
- Two (2) optical engraving lenses included as part of
standard supply
FlexoStar work piece choices:
Remote on-line servicing capability comprising:
- Self-centering three claw chuck and live center
- Removable air mandrel
- Fixed, non-removable drum (optional)
- Cantilevered air mandrel (optional)
Remote on-line servicing capability comprising:
- On-line remote software access of inspection and
control of machine functions
![DIRECT LASER ENGRAVING PRODUCTION [CO2 LASER]](../images/subtitle_specs_direct_laser.gif){kind=small}
- One sealed nominal 500 Watt CO2 laser
- MResolutions range from 500 dpcm to 1.150 dpcm (1.250 to 2.900 dpi) for typical screens ranging from 26 to 70 lpcm (65 to 175 lpi)
- Practical print form resolution up to 3.500 dpi x 3.500 dpi.
- Production rate from 0.4 to 1.2 m2 / hour depending
of selected resolution and engraved relief depth.
Typical engraving production of 0,65 m2 / hour with
0,5 mm relief and resolution of 750 dpcm (1900dpi)
Typical engraving production of 0,65 m2 / hour with
0,5 mm relief and resolution of 750 dpcm (1900dpi)
- Process work line screens up 80 lpcm (200 lpi)
- Note: engraved relief depth will vary for different
elastomer material formulations - Screen ruling up 80 lpcm (200 lpi)
- Standard model has 1.800 mm maximum engraving width. Larger engraving widths available in 500 mm wider increments.
- Maximum engraving height (repeat length): Standard model is prepared for circumferences which produce up to 1250 mm repeat length
- Pendant touch screen operator panel
- Machine and engraving function control software
- Two (2) optical engraving lenses included as part of standard supply
FlexoStar work piece choices:
- Self-centering three claw chuck and live center
- Removable air mandrel
- Fixed, non-removable drum (optional)
- Cantilevered air mandrel (optional)
Remote on-line servicing capability comprising:
- On-line remote software access of inspection and control of machine functions
